Products

This product belongs to a pre mixed cement-based grouting material with no shrinkage, self leveling, and high performance. It can operate for a long time and is suitable for use in different environmental temperatures. It can still flow underwater and has resistance to erosion.

HK-JHW polymer waterproof mortar is a convenient, low-cost, non-toxic and environmentally friendly repair material that can improve the durability of concrete, extend the service life of buildings, and prevent the expansion of concrete diseases. It has the characteristics of high bonding strength, small dry shrinkage deformation, low compressive strength, and strong corrosion resistance. At the same time, it can also improve the anti rust ability of the reinforcement and has a certain degree of compensatory shrinkage performance. When using polymer mortar, it is necessary to arrange the construction reasonably according to the local climate, engineering characteristics, and construction progress.

HK-KL is made from cement as a cementitious material, with the addition of various organic polymer and inorganic substances; It can be divided into two types of plastering mortar: single component and two-component; It has advantages such as high bonding strength, good flexibility, impermeability, waterproofing, crack resistance, and easy construction; It can effectively control cracks caused by factors such as plasticity, drying shrinkage, and temperature changes in mortar, and prevent and suppress problems such as cracks and leakage.

This is a composite refined product of polymer chemical materials and natural inorganic raw materials. It has water reducing, air entraining, and plasticizing effects, is non-toxic and odorless, has good workability, saves white ash, and improves the compressive strength of mortar. It is an excellent modifier for cement mortar.

The product is mainly used for peeling and sanding of cement roads and repairing potholes, repairing bridge expansion joints, and repairing concrete cracks. It has good bonding with the base layer, high early strength, good wear resistance and pressure resistance. It is an ideal material for emergency repair of concrete pavements, bridges, etc.

This product is mainly made of high-grade cement, ultra-fine hard aggregate and a variety of organic polymer additives. It has the characteristics of good fluidity, high viscosity, and strong adhesion. It is a ground cushion material that can be applied to a variety of base layers.

HKZS-M50 is a special engineering material composed of special cementitious materials, expansion materials, admixtures and high-strength aggregates. It has the characteristics of high fluidity, no shrinkage, high strength, early strength, and durability. It is suitable for sound barrier base, basin type rubber bearings grouting of simply supported box girder, cast-in-place girder bridge basin type rubber bearing grouting, top-made multi-piece spy basin type rubber bearing grouting, etc.

HK-7 is formulated by polycarboxylic acid superplasticizer and other functional admixture, with high water reduction, high reinforcement, ultra-early strength, low shrinkage and other performance. The product has strong adaptability to concrete preparation materials and low dosage, especially suitable for the production of concrete precast components.

HK-F011 is a formulated admixture with anti-sulfate corrosion, anti-rust, water-reducing, anti-corrosion, strengthening and other functions. It is suitable for basic engineering underwater or below freezing line, as well as concrete in marine environment, seaside areas, saline-alkali areas, etc. project.

The products mainly implement GB/T31296-2014 "Sulfate-resistant and corrosion-inhibiting admixtures for concrete"; JC/T 1011-2006 "Sulfate corrosion-resistance admixtures for concrete"; all performance indicators meet or exceed the standard requirements.

This product is mainly composed of grinding slag, silicon powder, silica fume, chemical compacting agent, etc. It can reduce the temperature rise, increase the late strength, and improve the workability and the internal structure of the concrete. It also helps to increase the compactness of the concrete, improve the durability and erosion resistance, inhibit the reaction of alkali-aggregate, increase wear resistance, crack resistance, and enhance the anti-seepage and anti-freeze performance. 

HKSN-1 is made of aluminum oxide clinker as the main component and then calcined and ground. The main function is to accelerate the concrete setting and is suitable for shotcrete. Because of its important characteristics, the concrete can be coagulated and hardened in a short time after being sprayed. It is a kind of coagulant that accelerates the cement hydration reaction and significantly shortens the setting time. It is essential for tunnel, repair construction, anti-seepage, plugging and anchoring, etc.

HKSN-II Flash Setting Admixture (liquid) is an agent which produced by our company for wet spraying process. Its main function is to adjust the concrete setting and hardening speed for sprayed concrete. With its important characteristics, the concrete can be hardened in a short time after being sprayed, which can accelerate the hydration reaction of the cement and significantly shorten the setting time. Other properties can meet various construction process requirements while maintaining various properties of concrete. It is an indispensable chemical pillar product for repairing, rushing, anti-seepage, plugging and anchoring.